Using Cell Culture Flasks to Optimize Your Laboratory Workflow

Using cell culture flasks can help to optimize your laboratory workflow by reducing waste, improving productivity, and ensuring efficient recovery of valuable cells. This type of vessel is typically manufactured from polystyrene and has a flat bottom, which enables it to be used in a range of laboratory conditions. It is also available in a number of different sizes. You can find them in six, twelve, twenty-four, and 96 well configurations. You can buy these vessels with or without a filter cap to prevent contamination.

The Cell Culture Flask is made of optically clear polystyrene and has molded sides with good access for cell scrapers. The vessel is recommended for use with a variety of different cell culture media products.

These vessels are also available in a three-layer stackable format, which allows you to maximize your cell growth surface area. These vessels come with a mix-port for rapid in-vessel mixing. They have an angled neck for easy access to your cell scrapers. They are designed to be used in a range of laboratories, from small scale bioproduction to large-scale bioreactors. The vessel also has a pipette access.

These flasks have been sterilized by a 1000 Gy, 4 MeV electron beam from a clinical linear accelerator. They are packaged in E-Beam sterilized bags. They are also packaged in clear lot numbers that allow for batch traceability. They are suitable for all laboratory applications and are ideal for storing and preparing media.

Alternatively, you can purchase these vessels in a five-layer stackable format. This is a less expensive option, but requires more maintenance. You will need to add dissociating reagent to each layer, distributing it to each well of the vessel. You can also use a neutralizing solution to reduce the acidity of the medium. It is recommended that you add a dissociating reagent to the Multi-Flask in the layer, then inactivating reagent in the second layer, and finally a neutralizing solution in the third and fourth layers.

The Multi-Flask provides five times the growth surface of the T-175 flask, making it possible to produce an environment similar to the T-175 flask without having to make large volumes of cell suspension externally. In addition, it allows you to create a sterile Laminar hood setup. This helps to reduce the risk of contamination from spilling the media. You can also transfer the Multi-Flask to other vessels for study of cell products.

The Multi-Flask is designed to provide the benefit to researchers while minimizing waste. The device is manufactured to be reusable, and it is designed to enable easy pipette access. The device is made from durable elastomeric material that will withstand cleaning and centrifugal forces. It is also compatible with a wide range of laboratory incubators. This enables you to transport your vessel to an incubator, and to view your cells on a microscope.

To prepare the Multi-Flask, you need to place it vertically on a clean work surface. After partitioning the fluid, you need to hold the flask at a 45 degree angle to the medium. You can also tilt the flask to the right if you want to remove media from the vessel. You should gently rock the flask to avoid foaming.

Cell Culture Flask Manufacturer

Variant No.	Name	Model	TC processing	Cover type	Package specification
1030100	Cell culture flasks	25cm2	No	Vent cap	10pcs/pack, 200 packs/case
1031100	Cell culture flasks	75cm2	No	Vent cap	5pcs/pack, 100 packs/case
1032010	Cell culture flasks	175cm2	No	Vent cap	5pcs/pack, 30 packs/case
1033010	Cell culture flasks	225cm2	No	Vent cap	5pcs/pack, 30 packs/case
1030000	Cell culture flasks	25cm2	Yes	Vent cap	10pcs/pack, 200 packs/case
1031000	Cell culture flasks	75cm2	Yes	Vent cap	5pcs/pack, 100 packs/case
1032000	Cell culture flasks	175cm2	Yes	Vent cap	5pcs/pack, 30 packs/case
1033000	Cell culture flasks	225cm2	Yes	Vent cap	5pcs/pack, 30 packs/case
1030110	Cell culture flasks	25cm2	No	Seal cap	10pcs/pack, 200 packs/case
1031110	Cell culture flasks	75cm2	No	Seal cap	5pcs/pack, 100 packs/case
1032110	Cell culture flasks	175cm2	No	Seal cap	5pcs/pack, 30 packs/case
1033110	Cell culture flasks	PREV: 3D Cell Culture Plates are also useful in tissue engineering research NEXT: The cell culture dish is a special container that promotes healthy cell growth and reproducibility Join Our Team A biological laboratory consumables manufacturer integrating R&D, production and sales. Quick Links Company Cooperation Quality Support Press & Events Products & Market Cell Culture Consumables Cell Imaging Consumables Bio-Filtration Consumables Molecular Testing Consumables Microbiological Consumables contact information Tel: +86-576-87777833 Email: [email protected] Phone: +86-139-5851-3293 Add: Blue Bay Entrepreneurship Center, Baitai Medical Equipment Park, Xianju County, Taizhou City, Zhejiang Province, China share Better Laboratory Consumables Copyright ? 2024 Zhejiang Saining Biotechnology Co., Ltd. All Rights Reserved.